Effect of Si and P of Steel in Galvanizing

Effect of Si and P of Steel in Galvanizing

The presence of Si in the steel articles to be galvanized results in the formation of a thick matte gray surface layer and poor coating adhesion. The fastest and thickest coatings usually occur when the Si content is between 0.04% and 0.12%, it also depends on...

Cooking with ANI Metal

Cooking is the easiest way to understand the galvanizing process. Of course, it is not as easy as cooking. However, you can figure out the nature of galvanizing by watching our recipe video! You can click the link as well to learn more about all the hot dip...
How To Paint Galvanized Steel?

How To Paint Galvanized Steel?

Painting a galvanized steel surface can be a challenge as the paint may fail to hold on to the surface. However, achieving a successful paint coating, Duplex System, is possible with a proper application. Duplex Systems: Effective application of the Duplex System...
Material Handling In Hot Dip Galvanizing

Material Handling In Hot Dip Galvanizing

One of the main issues in hot dip galvanizing process is the material handling. All the concentration must be given to make less material handling possible in the factory. The articles have to be loaded on jigs in the beginning of the galvanizing process and have to...

Vibrating Dross Grab

Excessive dross formation increases zinc consumption and galvanizing cost… Dross formation has to be under control… In addition to that bottom dross should be cleaned regularly in order to prevent premature kettle failures… “ANI Metal Vibrating...
error: Content is protected !!